+<?xml version='1.0'?>
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ xmlns:exsl="http://exslt.org/common"
+ xmlns:ng="http://docbook.org/docbook-ng"
+ xmlns:db="http://docbook.org/ns/docbook"
+ xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0"
+ exclude-result-prefixes="exsl"
+ version='1.0'>
+
+<!-- ********************************************************************
+ $Id: other.xsl 8865 2010-08-20 18:22:06Z mzjn $
+ ********************************************************************
+
+ This file is part of the XSL DocBook Stylesheet distribution.
+ See ../README or http://docbook.sf.net/release/xsl/current/ for
+ copyright and other information.
+
+ ******************************************************************** -->
+
+<!-- * This file contains named templates related to things other than -->
+<!-- * just assembling the actual text of the main text flow of each man -->
+<!-- * page. This "other" stuff currently amounts to these steps: -->
+<!-- * -->
+<!-- * - get contents of the "map" used to convert special characters -->
+<!-- * - output boilerplate messages -->
+<!-- * - escape backslash, dot, dash, and apostrophe characters -->
+<!-- * - convert non-breaking spaces -->
+<!-- * - add a comment to top part of roff source of each page -->
+<!-- * - make a .TH title line (for controlling page header/footer) -->
+<!-- * - set hyphenation, alignment, indent & line-breaking defaults -->
+<!-- * - "prepare" the complete man page contents for final output -->
+<!-- * - write the actual man file to the filesystem -->
+<!-- * - write any "stub" pages to the filesystem -->
+<!-- * -->
+<!-- * The templates in this file are actually called only once per -->
+<!-- * each Refentry; they are just in a separate file for the purpose -->
+<!-- * of keeping things modular. -->
+
+<!-- ==================================================================== -->
+
+<xsl:preserve-space elements="*"/>
+
+<xsl:strip-space elements="
+abstract affiliation anchor answer appendix area areaset areaspec
+artheader article audiodata audioobject author authorblurb authorgroup
+beginpage bibliodiv biblioentry bibliography biblioset blockquote book
+bookbiblio bookinfo callout calloutlist caption caution chapter
+citerefentry cmdsynopsis co collab colophon colspec confgroup
+copyright dedication docinfo editor entrytbl epigraph equation
+example figure footnote footnoteref formalpara funcprototype
+funcsynopsis glossary glossdef glossdiv glossentry glosslist graphicco
+group highlights imagedata imageobject imageobjectco important index
+indexdiv indexentry indexterm informalequation informalexample
+informalfigure informaltable inlineequation inlinemediaobject
+itemizedlist itermset keycombo keywordset legalnotice listitem lot
+mediaobject mediaobjectco menuchoice msg msgentry msgexplan msginfo
+msgmain msgrel msgset msgsub msgtext note objectinfo
+orderedlist othercredit part partintro preface printhistory procedure
+programlistingco publisher qandadiv qandaentry qandaset question
+refentry reference refmeta refnamediv refsection refsect1 refsect1info refsect2
+refsect2info refsect3 refsect3info refsynopsisdiv refsynopsisdivinfo
+revhistory revision row sbr screenco screenshot sect1 sect1info sect2
+sect2info sect3 sect3info sect4 sect4info sect5 sect5info section
+sectioninfo seglistitem segmentedlist seriesinfo set setindex setinfo
+shortcut sidebar simplelist simplesect spanspec step subject
+subjectset substeps synopfragment table tbody textobject tfoot tgroup
+thead tip toc tocchap toclevel1 toclevel2 toclevel3 toclevel4
+toclevel5 tocpart varargs variablelist varlistentry videodata
+videoobject void warning subjectset
+
+classsynopsis
+constructorsynopsis
+destructorsynopsis
+fieldsynopsis
+methodparam
+methodsynopsis
+ooclass
+ooexception
+oointerface
+simplemsgentry
+manvolnum
+"/>
+
+<!-- ==================================================================== -->
+<!-- * Get character map contents -->
+<!-- ==================================================================== -->
+
+ <xsl:variable name="man.charmap.contents">
+ <xsl:if test="$man.charmap.enabled != 0">
+ <xsl:variable name="lang">
+ <xsl:call-template name="l10n.language">
+ <xsl:with-param name="target" select="//refentry[1]"/>
+ </xsl:call-template>
+ </xsl:variable>
+ <xsl:call-template name="read-character-map">
+ <xsl:with-param name="use.subset" select="$man.charmap.use.subset"/>
+ <xsl:with-param name="subset.profile">
+ <xsl:choose>
+ <xsl:when test="$lang = 'en'">
+ <xsl:value-of select="$man.charmap.subset.profile.english"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="$man.charmap.subset.profile"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:with-param>
+ <xsl:with-param name="uri">
+ <xsl:choose>
+ <xsl:when test="$man.charmap.uri != ''">
+ <xsl:value-of select="$man.charmap.uri"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="'../manpages/charmap.groff.xsl'"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:if>
+ </xsl:variable>
+
+<!-- ==================================================================== -->
+
+<xsl:template name="root.messages">
+ <xsl:param name="refname"/>
+ <!-- redefine this any way you'd like to output messages -->
+ <!-- DO NOT OUTPUT ANYTHING FROM THIS TEMPLATE -->
+ <!-- Example:
+ <xsl:if test="//foo">
+ <xsl:call-template name="log.message">
+ <xsl:with-param name="level">Warn</xsl:with-param>
+ <xsl:with-param name="source" select="$refname"/>
+ <xsl:with-param name="context-desc">
+ <xsl:text>limitation</xsl:text>
+ </xsl:with-param>
+ <xsl:with-param name="message">
+ <xsl:text>Output for foo element is not yet supported.</xsl:text>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:if>
+ -->
+</xsl:template>
+
+<!-- ==================================================================== -->
+<!-- * Escape roff special chars -->
+<!-- ==================================================================== -->
+
+<!-- ******************************************************************** -->
+<!-- * -->
+<!-- * The backslash, dot, dash, and apostrophe (\, ., -, ') characters -->
+<!-- * have special meaning for roff, so before we do any other -->
+<!-- * processing, we must escape those characters where they appear in -->
+<!-- * the source content. -->
+<!-- * -->
+<!-- * Here we also deal with replacing U+00a0 (non-breaking space) with -->
+<!-- * its roff equivalent -->
+<!-- * -->
+<!-- ******************************************************************** -->
+
+<xsl:template match="//refentry//text()">
+ <xsl:call-template name="escape.roff.specials">
+ <xsl:with-param name="content">
+ <xsl:value-of select="."/>
+ </xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.roff.specials">
+ <xsl:param name="content"/>
+ <xsl:call-template name="convert.nobreak-space">
+ <xsl:with-param name="content">
+ <xsl:call-template name="escape.apostrophe">
+ <xsl:with-param name="content">
+ <xsl:call-template name="escape.dash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="escape.dot">
+ <xsl:with-param name="content">
+ <xsl:call-template name="escape.backslash">
+ <xsl:with-param name="content" select="$content"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.backslash">
+ <xsl:param name="content"/>
+ <xsl:call-template name="string.subst">
+ <xsl:with-param name="string" select="$content"/>
+ <xsl:with-param name="target">\</xsl:with-param>
+ <!-- * we use "\e" instead of "\\" because the groff docs say -->
+ <!-- * that's the correct thing to do; also because testing -->
+ <!-- * shows that "\\" doesn't always work as expected; for -->
+ <!-- * example, "\\" within a table seems to mess things up -->
+ <xsl:with-param name="replacement">\e</xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.dot">
+ <xsl:param name="content"/>
+ <xsl:call-template name="string.subst">
+ <xsl:with-param name="string" select="$content"/>
+ <xsl:with-param name="target">.</xsl:with-param>
+ <xsl:with-param name="replacement">\&.</xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.dash">
+ <xsl:param name="content"/>
+ <xsl:call-template name="string.subst">
+ <xsl:with-param name="string" select="$content"/>
+ <xsl:with-param name="target">-</xsl:with-param>
+ <xsl:with-param name="replacement">\-</xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.apostrophe">
+ <xsl:param name="content"/>
+ <xsl:call-template name="string.subst">
+ <xsl:with-param name="string" select="$content"/>
+ <xsl:with-param name="target">'</xsl:with-param>
+ <xsl:with-param name="replacement">\*(Aq</xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="convert.nobreak-space">
+ <xsl:param name="content"/>
+ <xsl:call-template name="string.subst">
+ <xsl:with-param name="string" select="$content"/>
+ <xsl:with-param name="target"> </xsl:with-param>
+ <!-- * A no-break space can be written two ways in roff; the -->
+ <!-- * difference, according to the "Page Motions" node in the -->
+ <!-- * groff info page, is: -->
+ <!-- * -->
+ <!-- * "\ " = -->
+ <!-- * An unbreakable and unpaddable (i.e. not expanded -->
+ <!-- * during filling) space. -->
+ <!-- * -->
+ <!-- * "\~" = -->
+ <!-- * An unbreakable space that stretches like a normal -->
+ <!-- * inter-word space when a line is adjusted." -->
+ <!-- * -->
+ <!-- * Unfortunately, roff seems to do some weird things with -->
+ <!-- * long lines that only have words separated by "\~" -->
+ <!-- * spaces, so it's safer just to stick with the "\ " space -->
+ <!-- * -->
+ <!-- * We append a "\&" to handle the case of a no-break space that -->
+ <!-- * appears at the end of a line - because later processing will -->
+ <!-- * cause that space to get eaten otherwise. -->
+ <xsl:with-param name="replacement">\ \&</xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<!-- ==================================================================== -->
+
+<!-- * top.comment generates a comment containing metadata for the man -->
+<!-- * page; for example, Author, Generator, and Date information -->
+
+ <xsl:template name="top.comment">
+ <xsl:param name="info"/>
+ <xsl:param name="date"/>
+ <xsl:param name="title"/>
+ <xsl:param name="manual"/>
+ <xsl:param name="source"/>
+ <xsl:param name="refname"/>
+ <xsl:text>.\" Title: </xsl:text>
+ <xsl:call-template name="replace.dots.and.dashes">
+ <xsl:with-param name="content" select="$title"/>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" Author: </xsl:text>
+ <xsl:call-template name="replace.dots.and.dashes">
+ <xsl:with-param name="content">
+ <xsl:call-template name="make.roff.metadata.author">
+ <xsl:with-param name="info" select="$info"/>
+ <xsl:with-param name="refname" select="$refname"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" Generator: DocBook </xsl:text>
+ <xsl:value-of select="$DistroTitle"/>
+ <xsl:text> v</xsl:text>
+ <xsl:call-template name="replace.dots.and.dashes">
+ <xsl:with-param name="content" select="$VERSION"/>
+ </xsl:call-template>
+ <xsl:text> <http://docbook.sf.net/></xsl:text>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" Date: </xsl:text>
+ <xsl:call-template name="replace.dots.and.dashes">
+ <xsl:with-param name="content" select="$date"/>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" Manual: </xsl:text>
+ <xsl:call-template name="replace.dots.and.dashes">
+ <xsl:with-param name="content" select="$manual"/>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" Source: </xsl:text>
+ <xsl:call-template name="replace.dots.and.dashes">
+ <xsl:with-param name="content" select="$source"/>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" Language: </xsl:text>
+ <xsl:call-template name="l10n.language.name"/>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\"</xsl:text>
+ <xsl:text> </xsl:text>
+ </xsl:template>
+
+<!-- ==================================================================== -->
+
+ <xsl:template name="TH.title.line">
+
+ <!-- * The exact way that .TH contents are displayed is system- -->
+ <!-- * dependent; it varies somewhat between OSes and roff -->
+ <!-- * versions. Below is a description of how Linux systems with -->
+ <!-- * a modern groff seem to render .TH contents. -->
+ <!-- * -->
+ <!-- * title(section) extra3 title(section) <- page header -->
+ <!-- * extra2 extra1 title(section) <- page footer-->
+ <!-- * -->
+ <!-- * Or, using the names with which the man(7) man page refers -->
+ <!-- * to the various fields: -->
+ <!-- * -->
+ <!-- * title(section) manual title(section) <- page header -->
+ <!-- * source date title(section) <- page footer-->
+ <!-- * -->
+ <!-- * Note that while extra1, extra2, and extra3 are all (nominally) -->
+ <!-- * optional, in practice almost all pages include an "extra1" -->
+ <!-- * field, which is, universally, a date (in some form), and it is -->
+ <!-- * always rendered in the same place (the middle footer position) -->
+ <!-- * -->
+ <!-- * Here are a couple of examples of real-world man pages that -->
+ <!-- * have somewhat useful page headers/footers: -->
+ <!-- * -->
+ <!-- * gtk-options(7) GTK+ User's Manual gtk-options(7) -->
+ <!-- * GTK+ 1.2 2003-10-20 gtk-options(7) -->
+ <!-- * -->
+ <!-- * svgalib(7) Svgalib User Manual svgalib(7) -->
+ <!-- * Svgalib 1.4.1 16 December 1999 svgalib(7) -->
+ <!-- * -->
+ <xsl:param name="title"/>
+ <xsl:param name="section"/>
+ <xsl:param name="extra1"/>
+ <xsl:param name="extra2"/>
+ <xsl:param name="extra3"/>
+
+ <xsl:call-template name="mark.subheading"/>
+ <!-- * Note that we generate quotes around _every_ field in the -->
+ <!-- * .TH title line, including the "title" and "section" -->
+ <!-- * fields. That is because we use the contents of those "as -->
+ <!-- * is", unchanged from the DocBook source; and DTD-based -->
+ <!-- * validation does not provide a way to constrain them to be -->
+ <!-- * "space free" -->
+ <xsl:text>.TH "</xsl:text>
+ <xsl:call-template name="string.upper">
+ <xsl:with-param name="string">
+ <xsl:choose>
+ <xsl:when test="$man.th.title.max.length != ''">
+ <xsl:value-of
+ select="normalize-space(substring($title, 1, $man.th.title.max.length))"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="normalize-space($title)"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:with-param>
+ </xsl:call-template>
+ <xsl:text>" "</xsl:text>
+ <xsl:value-of select="normalize-space($section)"/>
+ <xsl:text>" "</xsl:text>
+ <xsl:if test="$man.th.extra1.suppress = 0">
+ <!-- * there is no max.length for the extra1 field; the reason -->
+ <!-- * is, it is almost always a date, and it is not possible -->
+ <!-- * to truncate dates without changing their meaning -->
+ <xsl:value-of select="normalize-space($extra1)"/>
+ </xsl:if>
+ <xsl:text>" "</xsl:text>
+ <xsl:if test="$man.th.extra2.suppress = 0">
+ <xsl:choose>
+ <!-- * if max.length is non-empty, use value to truncate field -->
+ <xsl:when test="$man.th.extra2.max.length != ''">
+ <xsl:value-of
+ select="normalize-space(substring($extra2, 1, $man.th.extra2.max.length))"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="normalize-space($extra2)"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:if>
+ <xsl:text>" "</xsl:text>
+ <xsl:if test="$man.th.extra3.suppress = 0">
+ <xsl:choose>
+ <!-- * if max.length is non-empty, use value to truncate field -->
+ <xsl:when test="$man.th.extra3.max.length != ''">
+ <xsl:value-of
+ select="normalize-space(substring($extra3, 1, $man.th.extra3.max.length))"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="normalize-space($extra3)"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:if>
+ <xsl:text>" </xsl:text>
+ <xsl:call-template name="mark.subheading"/>
+ </xsl:template>
+
+ <!-- ============================================================== -->
+
+ <xsl:template name="set.default.formatting">
+ <!-- * Set default hyphenation, justification, indentation and -->
+ <!-- * line-breaking -->
+ <!-- * -->
+ <!-- * If the value of man.hypenate is zero (the default), then -->
+ <!-- * disable hyphenation (".nh" = "no hyphenation") -->
+ <xsl:text>.\" ----------------------------------------------------------------- </xsl:text>
+ <xsl:text>.\" * set default formatting </xsl:text>
+ <xsl:text>.\" ----------------------------------------------------------------- </xsl:text>
+ <xsl:if test="$man.hyphenate = 0">
+ <xsl:text>.\" disable hyphenation </xsl:text>
+ <xsl:text>.nh </xsl:text>
+ </xsl:if>
+ <!-- * If the value of man.justify is zero (the default), then -->
+ <!-- * disable justification (".ad l" means "adjust to left only") -->
+ <xsl:if test="$man.justify = 0">
+ <xsl:text>.\" disable justification</xsl:text>
+ <xsl:text> (adjust text to left margin only) </xsl:text>
+ <xsl:text>.ad l </xsl:text>
+ </xsl:if>
+ <xsl:if test="not($man.indent.refsect = 0)">
+ <xsl:text>.\" store initial "default indentation value" </xsl:text>
+ <xsl:text>.nr zq \n(IN </xsl:text>
+ <xsl:text>.\" adjust default indentation </xsl:text>
+ <xsl:text>.nr IN </xsl:text>
+ <xsl:value-of select="$man.indent.width"/>
+ <xsl:text> </xsl:text>
+ <xsl:text>.\" adjust indentation of SS headings </xsl:text>
+ <xsl:text>.nr SN \n(IN </xsl:text>
+ </xsl:if>
+ <!-- * Unless the value of man.break.after.slash is zero (the -->
+ <!-- * default), tell groff that it is OK to break a line -->
+ <!-- * after a slash when needed. -->
+ <xsl:if test="$man.break.after.slash != 0">
+ <xsl:text>.\" enable line breaks after slashes </xsl:text>
+ <xsl:text>.cflags 4 / </xsl:text>
+ </xsl:if>
+ </xsl:template>
+
+ <!-- ================================================================== -->
+
+ <!-- * The prepare.manpage.contents template is called after all -->
+ <!-- * other processing has been done, before serializing the -->
+ <!-- * result of all the other processing. It basically works on -->
+ <!-- * the result as one big string. -->
+ <xsl:template name="prepare.manpage.contents">
+ <xsl:param name="content" select="''"/>
+
+ <!-- * If user has provided a "local" string-substitution map to -->
+ <!-- * be applied /before/ the standard string-substitution map, -->
+ <!-- * apply it. -->
+ <xsl:variable name="pre.adjusted.content">
+ <xsl:choose>
+ <xsl:when test="$man.string.subst.map.local.pre">
+ <!-- * normalized value of man.string.subst.map.local.pre -->
+ <!-- * is non-empty, so get contents of map and apply them -->
+ <xsl:call-template name="apply-string-subst-map">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="map.contents"
+ select="exsl:node-set($man.string.subst.map.local.pre)/*"/>
+ </xsl:call-template>
+ </xsl:when>
+ <xsl:otherwise>
+ <!-- * value of man.string.subst.map.local.pre is empty, -->
+ <!-- * so just copy original contents -->
+ <xsl:value-of select="$content"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:variable>
+
+ <!-- * Apply standard string-substitution map. The main purpose -->
+ <!-- * of this map is to escape certain characters that have -->
+ <!-- * special meaning in roff, and to replace certain characters -->
+ <!-- * used within the stylesheet internally to represent roff -->
+ <!-- * markup characters. -->
+ <xsl:variable name="adjusted.content">
+ <xsl:call-template name="apply-string-subst-map">
+ <xsl:with-param name="content" select="$pre.adjusted.content"/>
+ <xsl:with-param name="map.contents"
+ select="exsl:node-set($man.string.subst.map)/*"/>
+ </xsl:call-template>
+ </xsl:variable>
+
+ <!-- * If user has provided a "local" string-substitution map to -->
+ <!-- * be applied /after/ the standard string-substitution map, -->
+ <!-- * apply it. -->
+ <xsl:variable name="post.adjusted.content">
+ <xsl:choose>
+ <xsl:when test="$man.string.subst.map.local.post">
+ <!-- * normalized value of man.string.subst.map.local.post -->
+ <!-- * is non-empty, so get contents of map and apply them -->
+ <xsl:call-template name="apply-string-subst-map">
+ <xsl:with-param name="content" select="$adjusted.content"/>
+ <xsl:with-param name="map.contents"
+ select="exsl:node-set($man.string.subst.map.local.post)/*"/>
+ </xsl:call-template>
+ </xsl:when>
+ <xsl:otherwise>
+ <!-- * value of man.string.subst.map.local.post is empty, -->
+ <!-- * so just copy original contents -->
+ <xsl:value-of select="$adjusted.content"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:variable>
+
+ <!-- * Optionally, apply a character map to replace Unicode -->
+ <!-- * symbols and special characters. -->
+ <xsl:choose>
+ <xsl:when test="$man.charmap.enabled != 0">
+ <xsl:call-template name="apply-character-map">
+ <xsl:with-param name="content" select="$post.adjusted.content"/>
+ <xsl:with-param name="map.contents"
+ select="exsl:node-set($man.charmap.contents)/*"/>
+ </xsl:call-template>
+ </xsl:when>
+ <xsl:otherwise>
+ <!-- * if we reach here, value of $man.charmap.enabled is zero, -->
+ <!-- * so we just pass the adjusted contents through "as is" -->
+ <xsl:value-of select="$adjusted.content"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:template>
+
+ <!-- ================================================================== -->
+
+ <xsl:template name="write.man.file">
+ <xsl:param name="name"/>
+ <xsl:param name="section"/>
+ <xsl:param name="lang"/>
+ <xsl:param name="content"/>
+ <xsl:param name="filename">
+ <xsl:call-template name="make.adjusted.man.filename">
+ <xsl:with-param name="name" select="$name"/>
+ <xsl:with-param name="section" select="$section"/>
+ <xsl:with-param name="lang" select="$lang"/>
+ </xsl:call-template>
+ </xsl:param>
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename" select="$filename"/>
+ <xsl:with-param name="suppress-context-node-name" select="1"/>
+ <xsl:with-param name="quiet" select="$man.output.quietly"/>
+ <xsl:with-param
+ name="message-prolog"
+ >Note: </xsl:with-param>
+ <xsl:with-param name="encoding" select="$man.output.encoding"/>
+ <xsl:with-param name="content" select="$content"/>
+ </xsl:call-template>
+ </xsl:template>
+
+ <!-- ============================================================== -->
+
+ <!-- * A "stub" is sort of alias for another file, intended to be read -->
+ <!-- * and expanded by soelim(1); it's simply a file whose complete -->
+ <!-- * contents are just a single line of the following form: -->
+ <!-- * -->
+ <!-- * .so manX/realname.X -->
+ <!-- * -->
+ <!-- * "realname" is a name of another man-page file. That .so line is -->
+ <!-- * basically a roff "include" statement. When the man command finds -->
+ <!-- * it, it calls soelim(1) and includes and displays the contents of -->
+ <!-- * the manX/realqname.X file. -->
+ <!-- * -->
+ <!-- * If a refentry has multiple refnames, we generate a "stub" page for -->
+ <!-- * each refname found, except for the first one. -->
+ <xsl:template name="write.stubs">
+ <xsl:param name="first.refname"/>
+ <xsl:param name="section"/>
+ <xsl:param name="lang"/>
+ <xsl:for-each select="refnamediv/refname">
+ <xsl:if test=". != $first.refname">
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename">
+ <xsl:call-template name="make.adjusted.man.filename">
+ <xsl:with-param name="name" select="."/>
+ <xsl:with-param name="section" select="$section"/>
+ <xsl:with-param name="lang" select="$lang"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ <xsl:with-param name="quiet" select="$man.output.quietly"/>
+ <xsl:with-param name="suppress-context-node-name" select="1"/>
+ <xsl:with-param name="message-prolog">Note: </xsl:with-param>
+ <xsl:with-param name="message-epilog"> (soelim stub)</xsl:with-param>
+ <xsl:with-param name="content">
+ <xsl:value-of select="'.so '"/>
+ <xsl:call-template name="make.adjusted.man.filename">
+ <xsl:with-param name="name" select="$first.refname"/>
+ <xsl:with-param name="section" select="$section"/>
+ <xsl:with-param name="lang" select="$lang"/>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:if>
+ </xsl:for-each>
+ </xsl:template>
+
+ <!-- ============================================================== -->
+
+ <!-- * A manifest file is useful for doing "make clean" during -->
+ <!-- * builds and for other purposes. When we make the manifest -->
+ <!-- * file, we need to include in it a filename for each man-page -->
+ <!-- * generated, including any "stub" pages. -->
+ <xsl:template name="generate.manifest">
+ <xsl:variable name="filelist">
+ <xsl:for-each select="//refentry">
+ <!-- * all refname instances in a Refentry inherit their section -->
+ <!-- * numbers from the parent Refentry; so we only need to get -->
+ <!-- * the section once per Refentry, not once per Refname -->
+ <xsl:variable name="section">
+ <xsl:call-template name="get.refentry.section">
+ <xsl:with-param name="quiet" select="1"/>
+ </xsl:call-template>
+ </xsl:variable>
+ <xsl:variable name="lang">
+ <xsl:call-template name="l10n.language"/>
+ </xsl:variable>
+ <xsl:for-each select="refnamediv/refname">
+ <xsl:call-template name="make.adjusted.man.filename">
+ <xsl:with-param name="name" select="."/>
+ <xsl:with-param name="section" select="$section"/>
+ <xsl:with-param name="lang" select="$lang"/>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+ </xsl:for-each>
+ </xsl:for-each>
+ </xsl:variable>
+
+ <!-- * we write the manifest file once per document, not once per -->
+ <!-- * Refentry -->
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename">
+ <xsl:value-of select="$man.output.manifest.filename"/>
+ </xsl:with-param>
+ <xsl:with-param name="quiet" select="1"/>
+ <xsl:with-param name="message-prolog">Note: </xsl:with-param>
+ <xsl:with-param name="message-epilog"> (manifest file)</xsl:with-param>
+ <xsl:with-param name="content">
+ <xsl:value-of select="$filelist"/>
+ </xsl:with-param>
+ </xsl:call-template>
+ <xsl:if test="$man.output.quietly = 0">
+ <xsl:message><xsl:text> </xsl:text></xsl:message>
+ </xsl:if>
+ </xsl:template>
+
+ <!-- ============================================================== -->
+
+ <!-- There is some stuff, that is not portable between groff/troff. -->
+ <xsl:template name="define.portability.macros">
+ <xsl:text>.\" ----------------------------------------------------------------- </xsl:text>
+ <xsl:text>.\" * Define some portability stuff </xsl:text>
+ <xsl:text>.\" ----------------------------------------------------------------- </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" http://bugs.debian.org/507673 </xsl:text>
+ <xsl:text>.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text> </xsl:text>
+ <xsl:text>.ie \n(.g .ds Aq \(aq</xsl:text>
+ <xsl:text> </xsl:text>
+ <xsl:text>.el .ds Aq '</xsl:text>
+ <xsl:text> </xsl:text>
+ </xsl:template>
+
+ <!-- ============================================================== -->
+
+ <xsl:template name="define.macros">
+ <xsl:text>.\" ----------------------------------------------------------------- </xsl:text>
+ <xsl:text>.\" * (re)Define some macros </xsl:text>
+ <xsl:text>.\" ----------------------------------------------------------------- </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" toupper - uppercase a string (locale-aware) </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.de toupper </xsl:text>
+ <xsl:text>.tr</xsl:text>
+ <xsl:text> </xsl:text>
+ <xsl:call-template name="make.tr.uppercase.arg"/>
+ <xsl:text>\\$* </xsl:text>
+ <xsl:text>.tr</xsl:text>
+ <xsl:text> </xsl:text>
+ <xsl:call-template name="make.tr.normalcase.arg"/>
+ <xsl:text>.. </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" SH-xref - format a cross-reference to an SH section </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.de SH-xref
+.ie n \{\
+.\}
+.toupper \\$*
+.el \{\
+\\$*
+.\}
+.. </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" SH - level-one heading that works better for non-TTY output </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.de1 SH </xsl:text>
+ <xsl:text>.\" put an extra blank line of space above the head in non-TTY output </xsl:text>
+ <xsl:call-template name="roff-if-start">
+ <xsl:with-param name="condition">t</xsl:with-param>
+ </xsl:call-template>
+ <xsl:text>.sp 1 </xsl:text>
+ <xsl:call-template name="roff-if-end"/>
+ <xsl:text>.sp \\n[PD]u
+.nr an-level 1
+.set-an-margin
+.nr an-prevailing-indent \\n[IN]
+.fi
+.in \\n[an-margin]u
+.ti 0
+.HTML-TAG ".NH \\n[an-level]"
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+\." make the size of the head bigger
+.ps +3
+.ft B
+.ne (2v + 1u)
+.ie n \{\
+.\" if n (TTY output), use uppercase
+.toupper \\$*
+.\}
+.el \{\
+.nr an-break-flag 0
+.\" if not n (not TTY), use normal case (not uppercase)
+\\$1
+.in \\n[an-margin]u
+.ti 0
+.\" if not n (not TTY), put a border/line under subheading
+.sp -.6
+\l'\n(.lu'
+.\}
+.. </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" SS - level-two heading that works better for non-TTY output </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.de1 SS
+.sp \\n[PD]u
+.nr an-level 1
+.set-an-margin
+.nr an-prevailing-indent \\n[IN]
+.fi
+.in \\n[IN]u
+.ti \\n[SN]u
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.ps \\n[PS-SS]u
+\." make the size of the head bigger
+.ps +2
+.ft B
+.ne (2v + 1u)
+.if \\n[.$] \&\\$*
+.. </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" BB/EB - put background/screen (filled box) around block of text </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.de BB
+.if t \{\
+.sp -.5
+.br
+.in +2n
+.ll -2n
+.gcolor red
+.di BX
+.\}
+..
+.de EB
+.if t \{\
+.if "\\$2"adjust-for-leading-newline" \{\
+.sp -1
+.\}
+.br
+.di
+.in
+.ll
+.gcolor
+.nr BW \\n(.lu-\\n(.i
+.nr BH \\n(dn+.5v
+.ne \\n(BHu+.5v
+.ie "\\$2"adjust-for-leading-newline" \{\
+\M[\\$1]\h'1n'\v'+.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
+.\}
+.el \{\
+\M[\\$1]\h'1n'\v'-.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
+.\}
+.in 0
+.sp -.5v
+.nf
+.BX
+.in
+.sp .5v
+.fi
+.\}
+.. </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.\" BM/EM - put colored marker in margin next to block of text </xsl:text>
+ <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text>
+ <xsl:text>.de BM
+.if t \{\
+.br
+.ll -2n
+.gcolor red
+.di BX
+.\}
+..
+.de EM
+.if t \{\
+.br
+.di
+.ll
+.gcolor
+.nr BH \\n(dn
+.ne \\n(BHu
+\M[\\$1]\D'P -.75n 0 0 \\n(BHu -(\\n[.i]u - \\n(INu - .75n) 0 0 -\\n(BHu'\M[]
+.in 0
+.nf
+.BX
+.in
+.fi
+.\}
+.. </xsl:text>
+</xsl:template>
+
+<xsl:template name="make.tr.uppercase.arg">
+ <xsl:call-template name="string.shuffle">
+ <xsl:with-param name="string1">
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'lowercase.alpha'"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ <xsl:with-param name="string2">
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'uppercase.alpha'"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+</xsl:template>
+
+<xsl:template name="make.tr.normalcase.arg">
+ <xsl:call-template name="string.shuffle">
+ <xsl:with-param name="string1">
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'lowercase.alpha'"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ <xsl:with-param name="string2">
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'lowercase.alpha'"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ <xsl:text> </xsl:text>
+</xsl:template>
+
+<xsl:template name="string.shuffle">
+ <!-- * given two strings, "shuffle" them together into one -->
+ <xsl:param name="string1"/>
+ <xsl:param name="string2"/>
+ <xsl:value-of select="substring($string1, 1, 1)"/>
+ <xsl:value-of select="substring($string2, 1, 1)"/>
+ <xsl:if test="string-length($string1) > 1">
+ <xsl:call-template name="string.shuffle">
+ <xsl:with-param name="string1">
+ <xsl:value-of select="substring($string1, 2)"/>
+ </xsl:with-param>
+ <xsl:with-param name="string2">
+ <xsl:value-of select="substring($string2, 2)"/>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:if>
+</xsl:template>
+
+</xsl:stylesheet>
git.stg.codes / stg.git / blobdiff