X-Git-Url: https://git.stg.codes/stg.git/blobdiff_plain/bfec9cc7ab5a396f7662090b208691ec59a69f1b..2f1753cc3e240fa497a87873ed19fe3f11e22331:/doc/help/xslt/manpages/other.xsl

diff --git a/doc/help/xslt/manpages/other.xsl b/doc/help/xslt/manpages/other.xsl
deleted file mode 100644
index 54319250..00000000
--- a/doc/help/xslt/manpages/other.xsl
+++ /dev/null
@@ -1,888 +0,0 @@
-<?xml version='1.0'?>
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                xmlns:exsl="http://exslt.org/common"
-                xmlns:ng="http://docbook.org/docbook-ng"
-                xmlns:db="http://docbook.org/ns/docbook"
-                xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0"
-                exclude-result-prefixes="exsl"
-                version='1.0'>
-
-<!-- ********************************************************************
-     $Id: other.xsl 8865 2010-08-20 18:22:06Z mzjn $
-     ********************************************************************
-
-     This file is part of the XSL DocBook Stylesheet distribution.
-     See ../README or http://docbook.sf.net/release/xsl/current/ for
-     copyright and other information.
-
-     ******************************************************************** -->
-
-<!-- * This file contains named templates related to things other than -->
-<!-- * just assembling the actual text of the main text flow of each man -->
-<!-- * page. This "other" stuff currently amounts to these steps: -->
-<!-- * -->
-<!-- *  - get contents of the "map" used to convert special characters -->
-<!-- *  - output boilerplate messages -->
-<!-- *  - escape backslash, dot, dash, and apostrophe characters -->
-<!-- *  - convert non-breaking spaces -->
-<!-- *  - add a comment to top part of roff source of each page -->
-<!-- *  - make a .TH title line (for controlling page header/footer) -->
-<!-- *  - set hyphenation, alignment, indent & line-breaking defaults -->
-<!-- *  - "prepare" the complete man page contents for final output -->
-<!-- *  - write the actual man file to the filesystem -->
-<!-- *  - write any "stub" pages to the filesystem -->
-<!-- * -->
-<!-- * The templates in this file are actually called only once per -->
-<!-- * each Refentry; they are just in a separate file for the purpose -->
-<!-- * of keeping things modular. -->
-
-<!-- ==================================================================== -->
-
-<xsl:preserve-space elements="*"/>
-
-<xsl:strip-space elements="
-abstract affiliation anchor answer appendix area areaset areaspec
-artheader article audiodata audioobject author authorblurb authorgroup
-beginpage bibliodiv biblioentry bibliography biblioset blockquote book
-bookbiblio bookinfo callout calloutlist caption caution chapter
-citerefentry cmdsynopsis co collab colophon colspec confgroup
-copyright dedication docinfo editor entrytbl epigraph equation
-example figure footnote footnoteref formalpara funcprototype
-funcsynopsis glossary glossdef glossdiv glossentry glosslist graphicco
-group highlights imagedata imageobject imageobjectco important index
-indexdiv indexentry indexterm informalequation informalexample
-informalfigure informaltable inlineequation inlinemediaobject
-itemizedlist itermset keycombo keywordset legalnotice listitem lot
-mediaobject mediaobjectco menuchoice msg msgentry msgexplan msginfo
-msgmain msgrel msgset msgsub msgtext note objectinfo
-orderedlist othercredit part partintro preface printhistory procedure
-programlistingco publisher qandadiv qandaentry qandaset question
-refentry reference refmeta refnamediv refsection refsect1 refsect1info refsect2
-refsect2info refsect3 refsect3info refsynopsisdiv refsynopsisdivinfo
-revhistory revision row sbr screenco screenshot sect1 sect1info sect2
-sect2info sect3 sect3info sect4 sect4info sect5 sect5info section
-sectioninfo seglistitem segmentedlist seriesinfo set setindex setinfo
-shortcut sidebar simplelist simplesect spanspec step subject
-subjectset substeps synopfragment table tbody textobject tfoot tgroup
-thead tip toc tocchap toclevel1 toclevel2 toclevel3 toclevel4
-toclevel5 tocpart varargs variablelist varlistentry videodata
-videoobject void warning subjectset
-
-classsynopsis
-constructorsynopsis
-destructorsynopsis
-fieldsynopsis
-methodparam
-methodsynopsis
-ooclass
-ooexception
-oointerface
-simplemsgentry
-manvolnum
-"/>
-
-<!-- ==================================================================== -->
-<!-- * Get character map contents -->
-<!-- ==================================================================== -->
-
-  <xsl:variable name="man.charmap.contents">
-    <xsl:if test="$man.charmap.enabled != 0">
-      <xsl:variable name="lang">
-        <xsl:call-template name="l10n.language">
-          <xsl:with-param name="target" select="//refentry[1]"/>
-        </xsl:call-template>
-      </xsl:variable>
-      <xsl:call-template name="read-character-map">
-        <xsl:with-param name="use.subset" select="$man.charmap.use.subset"/>
-        <xsl:with-param name="subset.profile">
-          <xsl:choose>
-            <xsl:when test="$lang = 'en'">
-              <xsl:value-of select="$man.charmap.subset.profile.english"/>
-            </xsl:when>
-            <xsl:otherwise>
-              <xsl:value-of select="$man.charmap.subset.profile"/>
-            </xsl:otherwise>
-          </xsl:choose>
-        </xsl:with-param>
-        <xsl:with-param name="uri">
-          <xsl:choose>
-            <xsl:when test="$man.charmap.uri != ''">
-              <xsl:value-of select="$man.charmap.uri"/>
-            </xsl:when>
-            <xsl:otherwise>
-              <xsl:value-of select="'../manpages/charmap.groff.xsl'"/>
-            </xsl:otherwise>
-          </xsl:choose>
-        </xsl:with-param>
-      </xsl:call-template>
-    </xsl:if>
-  </xsl:variable>
-
-<!-- ==================================================================== -->
-
-<xsl:template name="root.messages">
-  <xsl:param name="refname"/>
-  <!-- redefine this any way you'd like to output messages -->
-  <!-- DO NOT OUTPUT ANYTHING FROM THIS TEMPLATE -->
-  <!-- Example:
-  <xsl:if test="//foo">
-    <xsl:call-template name="log.message">
-      <xsl:with-param name="level">Warn</xsl:with-param>
-      <xsl:with-param name="source" select="$refname"/>
-      <xsl:with-param name="context-desc">
-        <xsl:text>limitation</xsl:text>
-      </xsl:with-param>
-      <xsl:with-param name="message">
-        <xsl:text>Output for foo element is not yet supported.</xsl:text>
-      </xsl:with-param>
-    </xsl:call-template>
-  </xsl:if>
-  -->
-</xsl:template>
-
-<!-- ==================================================================== -->
-<!-- * Escape roff special chars -->
-<!-- ==================================================================== -->
-
-<!-- ******************************************************************** -->
-<!-- *  -->
-<!-- * The backslash, dot, dash, and apostrophe (\, ., -, ') characters -->
-<!-- * have special meaning for roff, so before we do any other -->
-<!-- * processing, we must escape those characters where they appear in -->
-<!-- * the source content. -->
-<!-- *  -->
-<!-- * Here we also deal with replacing U+00a0 (non-breaking space) with -->
-<!-- * its roff equivalent -->
-<!-- *  -->
-<!-- ******************************************************************** -->
-
-<xsl:template match="//refentry//text()">
-  <xsl:call-template name="escape.roff.specials">
-    <xsl:with-param name="content">
-      <xsl:value-of select="."/>
-    </xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="escape.roff.specials">
-  <xsl:param name="content"/>
-  <xsl:call-template name="convert.nobreak-space">
-    <xsl:with-param name="content">
-      <xsl:call-template name="escape.apostrophe">
-        <xsl:with-param name="content">
-          <xsl:call-template name="escape.dash">
-            <xsl:with-param name="content">
-              <xsl:call-template name="escape.dot">
-                <xsl:with-param name="content">
-                  <xsl:call-template name="escape.backslash">
-                    <xsl:with-param name="content" select="$content"/>
-                  </xsl:call-template>
-                </xsl:with-param>
-              </xsl:call-template>
-            </xsl:with-param>
-          </xsl:call-template>
-        </xsl:with-param>
-      </xsl:call-template>
-    </xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="escape.backslash">
-  <xsl:param name="content"/>
-  <xsl:call-template name="string.subst">
-    <xsl:with-param name="string" select="$content"/>
-    <xsl:with-param name="target">\</xsl:with-param>
-    <!-- * we use "\e" instead of "\\" because the groff docs say -->
-    <!-- * that's the correct thing to do; also because testing -->
-    <!-- * shows that "\\" doesn't always work as expected; for -->
-    <!-- * example, "\\" within a table seems to mess things up -->
-    <xsl:with-param name="replacement">\e</xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="escape.dot">
-  <xsl:param name="content"/>
-  <xsl:call-template name="string.subst">
-    <xsl:with-param name="string" select="$content"/>
-    <xsl:with-param name="target">.</xsl:with-param>
-    <xsl:with-param name="replacement">\&amp;.</xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="escape.dash">
-  <xsl:param name="content"/>
-  <xsl:call-template name="string.subst">
-    <xsl:with-param name="string" select="$content"/>
-    <xsl:with-param name="target">-</xsl:with-param>
-    <xsl:with-param name="replacement">\-</xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="escape.apostrophe">
-  <xsl:param name="content"/>
-  <xsl:call-template name="string.subst">
-    <xsl:with-param name="string" select="$content"/>
-    <xsl:with-param name="target">'</xsl:with-param>
-    <xsl:with-param name="replacement">\*(Aq</xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="convert.nobreak-space">
-  <xsl:param name="content"/>
-  <xsl:call-template name="string.subst">
-    <xsl:with-param name="string" select="$content"/>
-    <xsl:with-param name="target">&#x00a0;</xsl:with-param>
-    <!-- * A no-break space can be written two ways in roff; the -->
-    <!-- * difference, according to the "Page Motions" node in the -->
-    <!-- * groff info page, is: -->
-    <!-- *  -->
-    <!-- *   "\ " = -->
-    <!-- *   An unbreakable and unpaddable (i.e. not expanded -->
-    <!-- *   during filling) space. -->
-    <!-- *  -->
-    <!-- *   "\~" = -->
-    <!-- *   An unbreakable space that stretches like a normal -->
-    <!-- *   inter-word space when a line is adjusted."  -->
-    <!-- *  -->
-    <!-- * Unfortunately, roff seems to do some weird things with -->
-    <!-- * long lines that only have words separated by "\~" -->
-    <!-- * spaces, so it's safer just to stick with the "\ " space -->
-    <!-- *  -->
-    <!-- * We append a "\&" to handle the case of a no-break space that -->
-    <!-- * appears at the end of a line - because later processing will -->
-    <!-- * cause that space to get eaten otherwise. -->
-    <xsl:with-param name="replacement">\ \&amp;</xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<!-- ==================================================================== -->
-
-<!-- * top.comment generates a comment containing metadata for the man -->
-<!-- * page; for example, Author, Generator, and Date information -->
-
-  <xsl:template name="top.comment">
-    <xsl:param name="info"/>
-    <xsl:param name="date"/>
-    <xsl:param name="title"/>
-    <xsl:param name="manual"/>
-    <xsl:param name="source"/>
-    <xsl:param name="refname"/>
-    <xsl:text>.\"     Title: </xsl:text>
-    <xsl:call-template name="replace.dots.and.dashes">
-      <xsl:with-param name="content" select="$title"/>
-    </xsl:call-template>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\"    Author: </xsl:text>
-    <xsl:call-template name="replace.dots.and.dashes">
-      <xsl:with-param name="content">
-        <xsl:call-template name="make.roff.metadata.author">
-          <xsl:with-param name="info" select="$info"/>
-          <xsl:with-param name="refname" select="$refname"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:call-template>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\" Generator: DocBook </xsl:text>
-    <xsl:value-of select="$DistroTitle"/>
-    <xsl:text> v</xsl:text>
-    <xsl:call-template name="replace.dots.and.dashes">
-      <xsl:with-param name="content" select="$VERSION"/>
-    </xsl:call-template>
-    <xsl:text> &lt;http://docbook.sf.net/></xsl:text>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\"      Date: </xsl:text>
-    <xsl:call-template name="replace.dots.and.dashes">
-      <xsl:with-param name="content" select="$date"/>
-    </xsl:call-template>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\"    Manual: </xsl:text>
-    <xsl:call-template name="replace.dots.and.dashes">
-      <xsl:with-param name="content" select="$manual"/>
-    </xsl:call-template>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\"    Source: </xsl:text>
-    <xsl:call-template name="replace.dots.and.dashes">
-      <xsl:with-param name="content" select="$source"/>
-    </xsl:call-template>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\"  Language: </xsl:text>
-    <xsl:call-template name="l10n.language.name"/>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.\"</xsl:text>
-    <xsl:text>&#10;</xsl:text>
-  </xsl:template>
-
-<!-- ==================================================================== -->
-
-  <xsl:template name="TH.title.line">
-
-    <!-- * The exact way that .TH contents are displayed is system- -->
-    <!-- * dependent; it varies somewhat between OSes and roff -->
-    <!-- * versions. Below is a description of how Linux systems with -->
-    <!-- * a modern groff seem to render .TH contents. -->
-    <!-- * -->
-    <!-- *   title(section)  extra3  title(section)  <- page header -->
-    <!-- *   extra2          extra1  title(section)  <- page footer-->
-    <!-- * -->
-    <!-- * Or, using the names with which the man(7) man page refers -->
-    <!-- * to the various fields: -->
-    <!-- * -->
-    <!-- *   title(section)  manual  title(section)  <- page header -->
-    <!-- *   source          date    title(section)  <- page footer-->
-    <!-- * -->
-    <!-- * Note that while extra1, extra2, and extra3 are all (nominally) -->
-    <!-- * optional, in practice almost all pages include an "extra1" -->
-    <!-- * field, which is, universally, a date (in some form), and it is -->
-    <!-- * always rendered in the same place (the middle footer position) -->
-    <!-- * -->
-    <!-- * Here are a couple of examples of real-world man pages that -->
-    <!-- * have somewhat useful page headers/footers: -->
-    <!-- * -->
-    <!-- *   gtk-options(7)    GTK+ User's Manual   gtk-options(7) -->
-    <!-- *   GTK+ 1.2              2003-10-20       gtk-options(7) -->
-    <!-- * -->
-    <!-- *   svgalib(7)       Svgalib User Manual       svgalib(7) -->
-    <!-- *   Svgalib 1.4.1      16 December 1999        svgalib(7) -->
-    <!-- * -->
-    <xsl:param name="title"/>
-    <xsl:param name="section"/>
-    <xsl:param name="extra1"/>
-    <xsl:param name="extra2"/>
-    <xsl:param name="extra3"/>
-
-    <xsl:call-template name="mark.subheading"/>
-    <!-- * Note that we generate quotes around _every_ field in the -->
-    <!-- * .TH title line, including the "title" and "section" -->
-    <!-- * fields. That is because we use the contents of those "as -->
-    <!-- * is", unchanged from the DocBook source; and DTD-based -->
-    <!-- * validation does not provide a way to constrain them to be -->
-    <!-- * "space free" -->
-    <xsl:text>.TH "</xsl:text>
-    <xsl:call-template name="string.upper">
-      <xsl:with-param name="string">
-        <xsl:choose>
-          <xsl:when test="$man.th.title.max.length != ''">
-            <xsl:value-of
-                select="normalize-space(substring($title, 1, $man.th.title.max.length))"/>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:value-of select="normalize-space($title)"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:with-param>
-    </xsl:call-template>
-    <xsl:text>" "</xsl:text>
-    <xsl:value-of select="normalize-space($section)"/>
-    <xsl:text>" "</xsl:text>
-    <xsl:if test="$man.th.extra1.suppress = 0">
-      <!-- * there is no max.length for the extra1 field; the reason -->
-      <!-- * is, it is almost always a date, and it is not possible -->
-      <!-- * to truncate dates without changing their meaning -->
-      <xsl:value-of select="normalize-space($extra1)"/>
-    </xsl:if>
-    <xsl:text>" "</xsl:text>
-    <xsl:if test="$man.th.extra2.suppress = 0">
-      <xsl:choose>
-        <!-- * if max.length is non-empty, use value to truncate field -->
-        <xsl:when test="$man.th.extra2.max.length != ''">
-          <xsl:value-of
-              select="normalize-space(substring($extra2, 1, $man.th.extra2.max.length))"/>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:value-of select="normalize-space($extra2)"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:if>
-    <xsl:text>" "</xsl:text>
-    <xsl:if test="$man.th.extra3.suppress = 0">
-      <xsl:choose>
-        <!-- * if max.length is non-empty, use value to truncate field -->
-        <xsl:when test="$man.th.extra3.max.length != ''">
-          <xsl:value-of
-              select="normalize-space(substring($extra3, 1, $man.th.extra3.max.length))"/>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:value-of select="normalize-space($extra3)"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:if>
-    <xsl:text>"&#10;</xsl:text>
-    <xsl:call-template name="mark.subheading"/>
-  </xsl:template>
-
-  <!-- ============================================================== -->
-
-  <xsl:template name="set.default.formatting">
-    <!-- * Set default hyphenation, justification, indentation and -->
-    <!-- * line-breaking -->
-    <!-- * -->
-    <!-- * If the value of man.hypenate is zero (the default), then -->
-    <!-- * disable hyphenation (".nh" = "no hyphenation") -->
-    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
-    <xsl:text>.\" * set default formatting&#10;</xsl:text>
-    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
-    <xsl:if test="$man.hyphenate = 0">
-      <xsl:text>.\" disable hyphenation&#10;</xsl:text>
-      <xsl:text>.nh&#10;</xsl:text>
-    </xsl:if>
-    <!-- * If the value of man.justify is zero (the default), then -->
-    <!-- * disable justification (".ad l" means "adjust to left only") -->
-    <xsl:if test="$man.justify = 0">
-      <xsl:text>.\" disable justification</xsl:text>
-      <xsl:text> (adjust text to left margin only)&#10;</xsl:text>
-      <xsl:text>.ad l&#10;</xsl:text>
-    </xsl:if>
-    <xsl:if test="not($man.indent.refsect = 0)">
-      <xsl:text>.\" store initial "default indentation value"&#10;</xsl:text>
-      <xsl:text>.nr zq \n(IN&#10;</xsl:text>
-      <xsl:text>.\" adjust default indentation&#10;</xsl:text>
-      <xsl:text>.nr IN </xsl:text>
-      <xsl:value-of select="$man.indent.width"/>
-      <xsl:text>&#10;</xsl:text>
-      <xsl:text>.\" adjust indentation of SS headings&#10;</xsl:text>
-      <xsl:text>.nr SN \n(IN&#10;</xsl:text>
-    </xsl:if>
-    <!-- * Unless the value of man.break.after.slash is zero (the -->
-    <!-- * default), tell groff that it is OK to break a line -->
-    <!-- * after a slash when needed. -->
-    <xsl:if test="$man.break.after.slash != 0">
-      <xsl:text>.\" enable line breaks after slashes&#10;</xsl:text>
-      <xsl:text>.cflags 4 /&#10;</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <!-- ================================================================== -->
-
-  <!-- * The prepare.manpage.contents template is called after all -->
-  <!-- * other processing has been done, before serializing the -->
-  <!-- * result of all the other processing. It basically works on -->
-  <!-- * the result as one big string. -->
-  <xsl:template name="prepare.manpage.contents">
-    <xsl:param name="content" select="''"/>
-
-    <!-- * If user has provided a "local" string-substitution map to -->
-    <!-- * be applied /before/ the standard string-substitution map, -->
-    <!-- * apply it. -->
-    <xsl:variable name="pre.adjusted.content">
-      <xsl:choose>
-        <xsl:when test="$man.string.subst.map.local.pre">
-          <!-- * normalized value of man.string.subst.map.local.pre -->
-          <!-- * is non-empty, so get contents of map and apply them -->
-          <xsl:call-template name="apply-string-subst-map">
-            <xsl:with-param name="content" select="$content"/>
-            <xsl:with-param name="map.contents"
-                            select="exsl:node-set($man.string.subst.map.local.pre)/*"/>
-          </xsl:call-template>
-        </xsl:when>
-        <xsl:otherwise>
-          <!-- * value of man.string.subst.map.local.pre is empty, -->
-          <!-- * so just copy original contents -->
-          <xsl:value-of select="$content"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:variable>
-
-    <!-- * Apply standard string-substitution map. The main purpose -->
-    <!-- * of this map is to escape certain characters that have -->
-    <!-- * special meaning in roff, and to replace certain characters -->
-    <!-- * used within the stylesheet internally to represent roff -->
-    <!-- * markup characters. -->
-    <xsl:variable name="adjusted.content">
-      <xsl:call-template name="apply-string-subst-map">
-        <xsl:with-param name="content" select="$pre.adjusted.content"/>
-        <xsl:with-param name="map.contents"
-                        select="exsl:node-set($man.string.subst.map)/*"/>
-      </xsl:call-template>
-    </xsl:variable>
-
-    <!-- * If user has provided a "local" string-substitution map to -->
-    <!-- * be applied /after/ the standard string-substitution map, -->
-    <!-- * apply it. -->
-    <xsl:variable name="post.adjusted.content">
-      <xsl:choose>
-        <xsl:when test="$man.string.subst.map.local.post">
-          <!-- * normalized value of man.string.subst.map.local.post -->
-          <!-- * is non-empty, so get contents of map and apply them -->
-          <xsl:call-template name="apply-string-subst-map">
-            <xsl:with-param name="content" select="$adjusted.content"/>
-            <xsl:with-param name="map.contents"
-                            select="exsl:node-set($man.string.subst.map.local.post)/*"/>
-          </xsl:call-template>
-        </xsl:when>
-        <xsl:otherwise>
-          <!-- * value of man.string.subst.map.local.post is empty, -->
-          <!-- * so just copy original contents -->
-          <xsl:value-of select="$adjusted.content"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:variable>
-
-    <!-- * Optionally, apply a character map to replace Unicode -->
-    <!-- * symbols and special characters. -->
-    <xsl:choose>
-      <xsl:when test="$man.charmap.enabled != 0">
-        <xsl:call-template name="apply-character-map">
-          <xsl:with-param name="content" select="$post.adjusted.content"/>
-          <xsl:with-param name="map.contents"
-                          select="exsl:node-set($man.charmap.contents)/*"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <!-- * if we reach here, value of $man.charmap.enabled is zero, -->
-        <!-- * so we just pass the adjusted contents through "as is" -->
-        <xsl:value-of select="$adjusted.content"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <!-- ================================================================== -->
-  
-  <xsl:template name="write.man.file">
-    <xsl:param name="name"/>
-    <xsl:param name="section"/>
-    <xsl:param name="lang"/>
-    <xsl:param name="content"/>
-    <xsl:param name="filename">
-      <xsl:call-template name="make.adjusted.man.filename">
-        <xsl:with-param name="name" select="$name"/>
-        <xsl:with-param name="section" select="$section"/>
-        <xsl:with-param name="lang" select="$lang"/>
-      </xsl:call-template>
-    </xsl:param>
-    <xsl:call-template name="write.text.chunk">
-      <xsl:with-param name="filename" select="$filename"/>
-      <xsl:with-param name="suppress-context-node-name" select="1"/>
-      <xsl:with-param name="quiet" select="$man.output.quietly"/>
-      <xsl:with-param
-          name="message-prolog"
-          >Note: </xsl:with-param>
-      <xsl:with-param name="encoding" select="$man.output.encoding"/>
-      <xsl:with-param name="content" select="$content"/>
-    </xsl:call-template>
-  </xsl:template>
-
-  <!-- ============================================================== -->
-
-  <!-- * A "stub" is sort of alias for another file, intended to be read -->
-  <!-- * and expanded by soelim(1); it's simply a file whose complete -->
-  <!-- * contents are just a single line of the following form: -->
-  <!-- * -->
-  <!-- *  .so manX/realname.X -->
-  <!-- * -->
-  <!-- * "realname" is a name of another man-page file. That .so line is -->
-  <!-- * basically a roff "include" statement.  When the man command finds -->
-  <!-- * it, it calls soelim(1) and includes and displays the contents of -->
-  <!-- * the manX/realqname.X file. -->
-  <!-- * -->
-  <!-- * If a refentry has multiple refnames, we generate a "stub" page for -->
-  <!-- * each refname found, except for the first one. -->
-  <xsl:template name="write.stubs">
-    <xsl:param name="first.refname"/>
-    <xsl:param name="section"/>
-    <xsl:param name="lang"/>
-    <xsl:for-each select="refnamediv/refname">
-      <xsl:if test=". != $first.refname">
-        <xsl:call-template name="write.text.chunk">
-          <xsl:with-param name="filename">
-            <xsl:call-template name="make.adjusted.man.filename">
-              <xsl:with-param name="name" select="."/>
-              <xsl:with-param name="section" select="$section"/>
-              <xsl:with-param name="lang" select="$lang"/>
-            </xsl:call-template>
-          </xsl:with-param>
-          <xsl:with-param name="quiet" select="$man.output.quietly"/>
-          <xsl:with-param name="suppress-context-node-name" select="1"/>
-          <xsl:with-param name="message-prolog">Note: </xsl:with-param>
-          <xsl:with-param name="message-epilog"> (soelim stub)</xsl:with-param>
-          <xsl:with-param name="content">
-            <xsl:value-of select="'.so '"/>
-            <xsl:call-template name="make.adjusted.man.filename">
-              <xsl:with-param name="name" select="$first.refname"/>
-              <xsl:with-param name="section" select="$section"/>
-              <xsl:with-param name="lang" select="$lang"/>
-            </xsl:call-template>
-            <xsl:text>&#10;</xsl:text>
-          </xsl:with-param>
-        </xsl:call-template>
-      </xsl:if>
-    </xsl:for-each>
-  </xsl:template>
-
-  <!-- ============================================================== -->
-
-  <!-- *  A manifest file is useful for doing "make clean" during -->
-  <!-- *  builds and for other purposes. When we make the manifest -->
-  <!-- *  file, we need to include in it a filename for each man-page -->
-  <!-- *  generated, including any "stub" pages. -->
-  <xsl:template name="generate.manifest">
-    <xsl:variable name="filelist">
-      <xsl:for-each select="//refentry">
-        <!-- * all refname instances in a Refentry inherit their section -->
-        <!-- * numbers from the parent Refentry; so we only need to get -->
-        <!-- * the section once per Refentry, not once per Refname -->
-        <xsl:variable name="section">
-          <xsl:call-template name="get.refentry.section">
-            <xsl:with-param name="quiet" select="1"/>
-          </xsl:call-template>
-        </xsl:variable>
-        <xsl:variable name="lang">
-          <xsl:call-template name="l10n.language"/>
-        </xsl:variable>
-        <xsl:for-each select="refnamediv/refname">
-          <xsl:call-template name="make.adjusted.man.filename">
-            <xsl:with-param name="name" select="."/>
-            <xsl:with-param name="section" select="$section"/>
-            <xsl:with-param name="lang" select="$lang"/>
-          </xsl:call-template>
-          <xsl:text>&#10;</xsl:text>
-        </xsl:for-each>
-      </xsl:for-each>
-    </xsl:variable>
-
-    <!-- * we write the manifest file once per document, not once per -->
-    <!-- * Refentry -->
-    <xsl:call-template name="write.text.chunk">
-      <xsl:with-param name="filename">
-        <xsl:value-of select="$man.output.manifest.filename"/>
-      </xsl:with-param>
-      <xsl:with-param name="quiet" select="1"/>
-      <xsl:with-param name="message-prolog">Note: </xsl:with-param>
-      <xsl:with-param name="message-epilog"> (manifest file)</xsl:with-param>
-      <xsl:with-param name="content">
-        <xsl:value-of select="$filelist"/>
-      </xsl:with-param>
-    </xsl:call-template>
-    <xsl:if test="$man.output.quietly = 0">
-      <xsl:message><xsl:text>&#10;</xsl:text></xsl:message>
-    </xsl:if>
-  </xsl:template>
-
-  <!-- ============================================================== -->
-
-  <!-- There is some stuff, that is not portable between groff/troff. -->
-  <xsl:template name="define.portability.macros">
-    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
-    <xsl:text>.\" * Define some portability stuff&#10;</xsl:text>
-    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" http://bugs.debian.org/507673&#10;</xsl:text>
-    <xsl:text>.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.ie \n(.g .ds Aq \(aq</xsl:text>
-    <xsl:text>&#10;</xsl:text>
-    <xsl:text>.el       .ds Aq '</xsl:text>
-    <xsl:text>&#10;</xsl:text>
-  </xsl:template>
-
-  <!-- ============================================================== -->
-
-  <xsl:template name="define.macros">
-    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
-    <xsl:text>.\" * (re)Define some macros&#10;</xsl:text>
-    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" toupper - uppercase a string (locale-aware)&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.de toupper&#10;</xsl:text>
-    <xsl:text>.tr</xsl:text>
-    <xsl:text> </xsl:text>
-    <xsl:call-template name="make.tr.uppercase.arg"/>
-    <xsl:text>\\$*&#10;</xsl:text>
-    <xsl:text>.tr</xsl:text>
-    <xsl:text> </xsl:text>
-    <xsl:call-template name="make.tr.normalcase.arg"/>
-    <xsl:text>..&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" SH-xref - format a cross-reference to an SH section&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.de SH-xref
-.ie n \{\
-.\}
-.toupper \\$*
-.el \{\
-\\$*
-.\}
-..&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" SH - level-one heading that works better for non-TTY output&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.de1 SH&#10;</xsl:text>
-    <xsl:text>.\" put an extra blank line of space above the head in non-TTY output&#10;</xsl:text>
-    <xsl:call-template name="roff-if-start">
-      <xsl:with-param name="condition">t</xsl:with-param>
-    </xsl:call-template>
-    <xsl:text>.sp 1&#10;</xsl:text>
-    <xsl:call-template name="roff-if-end"/>
-    <xsl:text>.sp \\n[PD]u
-.nr an-level 1
-.set-an-margin
-.nr an-prevailing-indent \\n[IN]
-.fi
-.in \\n[an-margin]u
-.ti 0
-.HTML-TAG ".NH \\n[an-level]"
-.it 1 an-trap
-.nr an-no-space-flag 1
-.nr an-break-flag 1
-\." make the size of the head bigger
-.ps +3
-.ft B
-.ne (2v + 1u)
-.ie n \{\
-.\" if n (TTY output), use uppercase
-.toupper \\$*
-.\}
-.el \{\
-.nr an-break-flag 0
-.\" if not n (not TTY), use normal case (not uppercase)
-\\$1
-.in \\n[an-margin]u
-.ti 0
-.\" if not n (not TTY), put a border/line under subheading
-.sp -.6
-\l'\n(.lu'
-.\}
-..&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" SS - level-two heading that works better for non-TTY output&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.de1 SS
-.sp \\n[PD]u
-.nr an-level 1
-.set-an-margin
-.nr an-prevailing-indent \\n[IN]
-.fi
-.in \\n[IN]u
-.ti \\n[SN]u
-.it 1 an-trap
-.nr an-no-space-flag 1
-.nr an-break-flag 1
-.ps \\n[PS-SS]u
-\." make the size of the head bigger
-.ps +2
-.ft B
-.ne (2v + 1u)
-.if \\n[.$] \&amp;\\$*
-..&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" BB/EB - put background/screen (filled box) around block of text&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.de BB
-.if t \{\
-.sp -.5
-.br
-.in +2n
-.ll -2n
-.gcolor red
-.di BX
-.\}
-..
-.de EB
-.if t \{\
-.if "\\$2"adjust-for-leading-newline" \{\
-.sp -1
-.\}
-.br
-.di
-.in
-.ll
-.gcolor
-.nr BW \\n(.lu-\\n(.i
-.nr BH \\n(dn+.5v
-.ne \\n(BHu+.5v
-.ie "\\$2"adjust-for-leading-newline" \{\
-\M[\\$1]\h'1n'\v'+.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
-.\}
-.el \{\
-\M[\\$1]\h'1n'\v'-.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
-.\}
-.in 0
-.sp -.5v
-.nf
-.BX
-.in
-.sp .5v
-.fi
-.\}
-..&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.\" BM/EM - put colored marker in margin next to block of text&#10;</xsl:text>
-    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
-    <xsl:text>.de BM
-.if t \{\
-.br
-.ll -2n
-.gcolor red
-.di BX
-.\}
-..
-.de EM
-.if t \{\
-.br
-.di
-.ll
-.gcolor
-.nr BH \\n(dn
-.ne \\n(BHu
-\M[\\$1]\D'P -.75n 0 0 \\n(BHu -(\\n[.i]u - \\n(INu - .75n) 0 0 -\\n(BHu'\M[]
-.in 0
-.nf
-.BX
-.in
-.fi
-.\}
-..&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="make.tr.uppercase.arg">
-  <xsl:call-template name="string.shuffle">
-    <xsl:with-param name="string1">
-      <xsl:call-template name="gentext">
-        <xsl:with-param name="key" select="'lowercase.alpha'"/>
-      </xsl:call-template>
-    </xsl:with-param>
-    <xsl:with-param name="string2">
-      <xsl:call-template name="gentext">
-        <xsl:with-param name="key" select="'uppercase.alpha'"/>
-      </xsl:call-template>
-    </xsl:with-param>
-  </xsl:call-template>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="make.tr.normalcase.arg">
-  <xsl:call-template name="string.shuffle">
-    <xsl:with-param name="string1">
-      <xsl:call-template name="gentext">
-        <xsl:with-param name="key" select="'lowercase.alpha'"/>
-      </xsl:call-template>
-    </xsl:with-param>
-    <xsl:with-param name="string2">
-      <xsl:call-template name="gentext">
-        <xsl:with-param name="key" select="'lowercase.alpha'"/>
-      </xsl:call-template>
-    </xsl:with-param>
-  </xsl:call-template>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="string.shuffle">
-  <!-- * given two strings, "shuffle" them together into one -->
-  <xsl:param name="string1"/>
-  <xsl:param name="string2"/>
-  <xsl:value-of select="substring($string1, 1, 1)"/>
-  <xsl:value-of select="substring($string2, 1, 1)"/>
-  <xsl:if test="string-length($string1) > 1">
-    <xsl:call-template name="string.shuffle">
-      <xsl:with-param name="string1">
-        <xsl:value-of select="substring($string1, 2)"/>
-      </xsl:with-param>
-      <xsl:with-param name="string2">
-        <xsl:value-of select="substring($string2, 2)"/>
-      </xsl:with-param>
-    </xsl:call-template>
-  </xsl:if>
-</xsl:template>
-
-</xsl:stylesheet>