Port to CMake, get rid of os_int.h.

[stg.git] / stargazer / scripts / shaper_vpn_radius / pptpd.conf

diff --git a/stargazer/scripts/shaper_vpn_radius/pptpd.conf b/stargazer/scripts/shaper_vpn_radius/pptpd.conf
new file mode 100644 (file)
index 0000000..5c64b83
--- /dev/null
+++ b/stargazer/scripts/shaper_vpn_radius/pptpd.conf
@@ -0,0 +1,82 @@
+###############################################################################
+# $Id: pptpd.conf,v 1.1 2008/03/31 13:54:13 faust Exp $
+#
+# Sample Poptop configuration file /etc/pptpd.conf
+#
+# Changes are effective when pptpd is restarted.
+###############################################################################
+
+# TAG: ppp
+#      Path to the pppd program, default '/usr/sbin/pppd' on Linux
+#
+#ppp /usr/sbin/pppd
+
+# TAG: option
+#      Specifies the location of the PPP options file.
+#      By default PPP looks in '/etc/ppp/options'
+#
+option /etc/ppp/pptpd-options
+
+# TAG: debug
+#      Turns on (more) debugging to syslog
+#
+#debug
+
+# TAG: stimeout
+#      Specifies timeout (in seconds) on starting ctrl connection
+#
+# stimeout 10
+
+# TAG: noipparam
+#       Suppress the passing of the client's IP address to PPP, which is
+#       done by default otherwise.
+#
+#noipparam
+
+# TAG: logwtmp
+#      Use wtmp(5) to record client connections and disconnections.
+#
+logwtmp
+
+# TAG: bcrelay <if>
+#      Turns on broadcast relay to clients from interface <if>
+#
+#bcrelay eth1
+
+# TAG: localip
+# TAG: remoteip
+#      Specifies the local and remote IP address ranges.
+#
+#       Any addresses work as long as the local machine takes care of the
+#       routing.  But if you want to use MS-Windows networking, you should
+#       use IP addresses out of the LAN address space and use the proxyarp
+#       option in the pppd options file, or run bcrelay.
+#
+#      You can specify single IP addresses seperated by commas or you can
+#      specify ranges, or both. For example:
+#
+#              192.168.0.234,192.168.0.245-249,192.168.0.254
+#
+#      IMPORTANT RESTRICTIONS:
+#
+#      1. No spaces are permitted between commas or within addresses.
+#
+#      2. If you give more IP addresses than MAX_CONNECTIONS, it will
+#         start at the beginning of the list and go until it gets 
+#         MAX_CONNECTIONS IPs. Others will be ignored.
+#
+#      3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
+#         you must type 234-238 if you mean this.
+#
+#      4. If you give a single localIP, that's ok - all local IPs will
+#         be set to the given one. You MUST still give at least one remote
+#         IP for each simultaneous client.
+#
+# (Recommended)
+#localip 192.168.0.1
+#remoteip 192.168.0.234-238,192.168.0.245
+# or
+#localip 192.168.0.234-238,192.168.0.245
+#remoteip 192.168.1.234-238,192.168.1.245
+localip 192.168.2.1
+remoteip 192.168.2.2-254