Move projects back into subfolder.

[stg.git] / stargazer / scripts / shaper_vpn_radius / pptpd.conf

diff --git a/stargazer/scripts/shaper_vpn_radius/pptpd.conf b/stargazer/scripts/shaper_vpn_radius/pptpd.conf
deleted file mode 100644 (file)
index 5c64b83..0000000
--- a/stargazer/scripts/shaper_vpn_radius/pptpd.conf
+++ /dev/null
@@ -1,82 +0,0 @@
-###############################################################################
-# $Id: pptpd.conf,v 1.1 2008/03/31 13:54:13 faust Exp $
-#
-# Sample Poptop configuration file /etc/pptpd.conf
-#
-# Changes are effective when pptpd is restarted.
-###############################################################################
-
-# TAG: ppp
-#      Path to the pppd program, default '/usr/sbin/pppd' on Linux
-#
-#ppp /usr/sbin/pppd
-
-# TAG: option
-#      Specifies the location of the PPP options file.
-#      By default PPP looks in '/etc/ppp/options'
-#
-option /etc/ppp/pptpd-options
-
-# TAG: debug
-#      Turns on (more) debugging to syslog
-#
-#debug
-
-# TAG: stimeout
-#      Specifies timeout (in seconds) on starting ctrl connection
-#
-# stimeout 10
-
-# TAG: noipparam
-#       Suppress the passing of the client's IP address to PPP, which is
-#       done by default otherwise.
-#
-#noipparam
-
-# TAG: logwtmp
-#      Use wtmp(5) to record client connections and disconnections.
-#
-logwtmp
-
-# TAG: bcrelay <if>
-#      Turns on broadcast relay to clients from interface <if>
-#
-#bcrelay eth1
-
-# TAG: localip
-# TAG: remoteip
-#      Specifies the local and remote IP address ranges.
-#
-#       Any addresses work as long as the local machine takes care of the
-#       routing.  But if you want to use MS-Windows networking, you should
-#       use IP addresses out of the LAN address space and use the proxyarp
-#       option in the pppd options file, or run bcrelay.
-#
-#      You can specify single IP addresses seperated by commas or you can
-#      specify ranges, or both. For example:
-#
-#              192.168.0.234,192.168.0.245-249,192.168.0.254
-#
-#      IMPORTANT RESTRICTIONS:
-#
-#      1. No spaces are permitted between commas or within addresses.
-#
-#      2. If you give more IP addresses than MAX_CONNECTIONS, it will
-#         start at the beginning of the list and go until it gets 
-#         MAX_CONNECTIONS IPs. Others will be ignored.
-#
-#      3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
-#         you must type 234-238 if you mean this.
-#
-#      4. If you give a single localIP, that's ok - all local IPs will
-#         be set to the given one. You MUST still give at least one remote
-#         IP for each simultaneous client.
-#
-# (Recommended)
-#localip 192.168.0.1
-#remoteip 192.168.0.234-238,192.168.0.245
-# or
-#localip 192.168.0.234-238,192.168.0.245
-#remoteip 192.168.1.234-238,192.168.1.245
-localip 192.168.2.1
-remoteip 192.168.2.2-254